Documentation

How Hypersafe works

Launching a token is easy. Building something people can trust is different. That is why liquidity is locked forever on HyperSwap and PRJX. Pair with HYPE, USDC or USD₮0. There is no bonding-curve phase and no migration. The pool your token starts in is the pool it lives in forever.

Overview

Anyone can launch a token in one transaction. The entire supply of 1,000,000,000 tokens goes straight into a real Uniswap V3-style pool on the venue you pick, and the LP position is sent to a vault that cannot drain it.

1. 01

   Launch

   One transaction. You pick the venue and the quote. The token, its v3 pool and the permanent liquidity lock all happen in the same call — no presale, no team allocation, no liquidity to seed by hand.

2. 02

   Instantly tradeable

   Your token trades on HyperSwap or PRJX from block one. On a HYPE pair you can make the first buy inside the launch transaction itself, so no one can front-run you into your own token.

3. 03

   Liquidity locked forever

   The full supply is deposited as liquidity and the position NFT is sent to a vault with no withdrawal function. Nobody can pull it out — including us.

4. 04

   Earn on every trade

   Every swap pays a 1% pool fee. You get 80% of collected fees. 20% goes to Hypersafe. The split never changes. Claim it from Earn whenever you want.

Launch mechanism

The supply is minted to the factory and deposited as a single-sided position: all of it sits above the starting price, so the pool opens holding nothing but your token. Nobody has paid anything yet — the first buyer walks the price up from there.

At launch you choose where the pool lives. That choice is written on-chain as dexId and cannot be edited afterwards. Both venues are Uniswap V3 forks on HyperEVM, both use a 1% fee tier, and both lock the same way.

dexId 0

PRJX v3

Project X concentrated liquidity. Instant pool on PRJX.

dexId 1

HyperSwap v3

HyperSwap concentrated liquidity. Native HyperEVM depth.

Total supply

1,000,000,000 tokens

Launch fee

none — only network gas

Pool fee tier

1%

Creator share

80% of collected fees

Protocol share

20%

Liquidity

100% locked, permanently

NoteOther pads on HyperEVM list on one venue. Hypersafe lets you pick HyperSwap or PRJX at launch — that is the whole point. The starting price is set per quote token on the factory, not from an oracle.

Quote tokens

A token is priced against one other token, chosen at launch. That can be HYPE — the chain's own coin — or a dollar stablecoin (USDC or USD₮0). The quote is written as quoteId and cannot be changed.

QuoteTracksGraduates at

HYPEHYPE111 HYPE

USDCUSD Coin9,000 USDC

USD₮0Tether (USD₮0)9,000 USD₮0

WarningUSDC and USD₮0 are issuer-controlled stablecoins. A token quoted in either of them takes on that token's risk on top of its own.

Trading and pricing

Trades go through the venue's own router against your token's pool. A HYPE-quoted token is bought and sold in HYPE. A USDC or USD₮0 pool is traded in that stablecoin.

Venue

HyperSwap v3 or PRJX v3 — your choice

Pool fee

1% per swap

Price shown

quoted live from the venue quoter before you sign

Routing

direct in the quote token

Graduation

Graduation is a milestone, not a migration. When a token's pool has taken on roughly $9,000 of its quote token in net buys it earns the graduated badge and better placement. Nothing about the pool changes — it was a real v3 pool from the first block and stays one.

Threshold

≈ $9,000 — 111 HYPE, 9,000 USDC or 9,000 USD₮0

What changes

badge and ranking only

Time limit

none

If it never graduates

the token trades and earns fees regardless

Fees and rewards

Every swap pays a 1% fee into the pool. Because the position is locked, that fee is the only thing anyone can ever take out of it. A V3 pool collects fees in both of its tokens. Both sides are split 80 / 20.

Swap fee

1% of every trade

Creator

80% of collected fees

Protocol

20%

Claiming

any time, no threshold, no lockup

Launch fee

none

NoteFees accrue inside the pool and are swept on demand from the Earn page. A claim collects everything earned since the last one. The 80 / 20 split is snapshotted when the pool is locked and cannot be changed afterwards.

Launch protection

For the first 366 seconds a single wallet cannot hold more than 3% of the supply. It blunts the bots that would otherwise take the whole pool in the first block and sell it back to the people who came for the token.

Window

366 seconds (~6 minutes)

Max wallet during window

3% of supply

After the window

no restrictions at all

Community takeovers

If the original creator steps away, the fee recipient can be pointed at a new wallet. That does not move the token, the pool, or the locked liquidity — only where creator fees are paid.

What can change

creator fee wallet only

What cannot change

token, pool, locked LP, venue, quote

Who can change it

the original creator, via the locker

NoteA takeover is not an endorsement and says nothing about a token's safety or value. Liquidity stays locked either way.

Risk disclosures

• Transactions are irreversible. Nothing here can be undone, refunded or reversed, by us or anyone else.
• Tokens routinely go to zero. Only the liquidity is locked — the price is not, and locked liquidity does not mean a floor.
• A token quoted in USDC or USD₮0 carries that token's risk as well as its own.
• USDC and USD₮0 are issuer-controlled contracts whose issuers can freeze balances or pause transfers.
• Starting prices and graduation targets are set by hand from observed prices. They drift, and they are nobody's promise.
• Hypersafe is an independent project and is not affiliated with, endorsed by, or officially supported by PRJX or HyperSwap. It uses their v3 infrastructure and liquidity pools.
• Nothing on this site is investment advice.

Network

Chain

HyperEVM — chain ID 999

Native token

HYPE, 18 decimals

RPC

https://rpc.hyperliquid.xyz/evm

Explorer

hyperevmscan.io

Block time

~1 second (small blocks)

Contracts

Hypersafe

Venues — not ours

Onchain events

Watch the factory and the fee vault. Two events carry what an indexer needs for every token. Take the pool address from TokenLaunched rather than deriving it — the venue (dexId) decides which factory minted the pool.

TokenLaunched

The pool is open and the token is tradeable. This is where the pool address, venue and quote come from.

TokenLaunched(
  address indexed token,
  address indexed deployer,
  address pool,
  uint256 positionId,
  uint256 devBuy,
  uint8 dexId,
  uint8 quoteId
)

dexId 0

PRJX v3

dexId 1

HyperSwap v3

quoteId 0

HYPE

quoteId 1

USDC

quoteId 2

USD₮0

FeesClaimed

A creator swept fees. amount0 / amount1 follow pool token order, not “HYPE then meme”.

FeesClaimed(
  address indexed token,
  address indexed caller,
  address recipient,
  uint256 creatorAmount0,
  uint256 creatorAmount1,
  uint256 protocolAmount0,
  uint256 protocolAmount1
)

WarningAmounts in these events are in the pool's tokens. Reading them as HYPE across the board will misprice every USDC- and USD₮0-quoted token.

Logos and metadata

A token's logo is not stored as a separate on-chain field. The factory writes one string, metaURI, on the token. That string is inline JSON. Artwork is pinned to IPFS at launch; metaURI.image is the IPFS address (ipfs://… or an https gateway URL), not a compressed on-chain JPEG. This is the step most integrations miss, and missing it is why a token shows up as initials on a grey circle.

1. Read metaURI from the token contract.
2. If it is JSON, parse it. If it is a URL, fetch it.
3. Read image, description, twitter, telegram and website from that JSON.

{
  "image": "ipfs://bafy…",
  "description": "…",
  "twitter": "…",
  "telegram": "…",
  "website": "…"
}

NoteName and ticker live on the token contract itself. Only artwork and links go through metaURI.

Token list

A public Uniswap-style token list is not published yet. Until it is, walk TokenLaunched on the factory and resolve logos from metaURI as above. Every token this factory launched is also in allTokens(i).

Chain ID

999

Source of truth

factory TokenLaunched + allTokens

Data API

A public REST API is not live yet. The site reads HyperEVM directly. For your own indexer, subscribe to TokenLaunched and FeesClaimed, then price each pool with that venue's quoter.

Auth

none — read the chain

Quotes

venue QuoterV2 / Quoter, by dexId

NoteWhen an API ships it will be documented here. Do not trust unofficial endpoints that ask for a wallet or a key.

FAQ

Contact

For listings, integrations or a token launched here, use the site itself. We will never message you first asking for a wallet, a seed phrase or a private key, and nobody from this project will ever need any of them. Anything that does is not us, whatever address it was sent from.